Raymarine 150/400 Manuel d'installation télécharger pdf (Page 55)

Chapter 3: Adjusting SmartPilot Settings 47

Dealer Calibration screens and settings

The items in Dealer Calibration vary according to the vessel type you have

selected. See the table on page 57 for default values.

SeaTrial Calibration lock

This screen controls whether it is possible to access Seatrial Calibration.

Vessel type

Vessel type should be set when commissioning the SmartPilot (see page 23).

Note: When you select the vessel type, the SmartPilot will set appropriate

defaults for several other calibration settings. Refer to the table on page 57

for default values.

Options

CAL LOCK OFF Calibration lock off – Seatrial calibration can be accessed

(default)

CAL LOCK ON Calibration lock on – Seatrial calibration cannot be accessed

Options

DISPLACE Power-driven boats which do not plane

(Typically below 15 kts top speed)

SEMI DISPLACE Faster power-driven boats which do not plane

(Typically 15-20 kts top speed)

PLANING Planing boats with inboard engine(s) and shaft drives

(NOT boats with outdrives)

STERN DRV Boats with outdrives or outboard engines

WORK BOAT Commercial tugs, fishing vessels, etc

SAIL BOAT Sailing boat

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 79 80

Pas de commentaire

Raymarine 150/400 Manuel d'installation Page 55