Raymarine VolvoPenta IPS Autopilot System DPU Manuel d'installation Page 63

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 80
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 62
Chapter 3: Adjusting SmartPilot Settings 53
AutoRelease (I/O drives only)
Only available if vessel type = STERNDRV.
AutoRelease provides emergency manual over-ride in situations when you need
to avoid an obstacle at the last moment. If the vessel type is set to STERN DRV
(I/O or stern drive), you will see the AutoRelease screen (AUTO RELSE) set to
ON as a default.
AutoTack angle
Note:
Only available if vessel type =
SAIL BOAT
.
The AutoTack angle is the angle through which the boat will turn when you select
an automatic tack.
Gybe inhibit
Note:
Only available if vessel type =
SAIL BOAT
.
With gybe inhibit on:
you will be able to perform an AutoTack into the wind
to prevent accidental gybes, the SmartPilot will prevent the boat from per-
forming an AutoTack away from the wind
With gybe inhibit off, you can perform an AutoTack into or away from the wind.
Screen Text Range
AUTO RELEASE ON = AutoRelease on (default)
OFF = AutoRelease off
Screen Text Options
AUTO TACK 40° to 125° in 1° steps
Screen Text Options
GYBE STOP On (Default) = Gybe inhibit on (gybes prevented)
OFF = Gybe inhibit off (gybes permitted)
81273_1.book Page 53 Monday, December 5, 2005 10:32 AM
Vue de la page 62
1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 79 80

Commentaires sur ces manuels

Pas de commentaire