Raymarine E55061 Manuel d'utilisateur télécharger pdf (Page 8)

5. Peel the backing from the gasket and stick it

to the underside of the cradle.

7. If mounting the keyboard in an area

unprotected from rain and/or sea spray, fit

the drain tube and ensure that it runs to a

suitable exit point below the level of the

keyboard and the studs.

8. Fit the keyboard assembly into its housing.

With the dimples in the clamps fitting into

the nipples on the cradle, fit and secure the

clamps in place using the thumb nuts.

9. Ensuring that the power is connected last,

connect all the cables, terminators etc

in the appropriate configuration (see

'Planning the Installation' on pages 4 to 6).

Wrap any excess cable and tuck away.

Do not cut and resplice cables.

6. Finger tighten the studs into position.

8

D7700-1

Installation - continued

1 2 3 4 5 6 7 8 9 10 11 12 13

Commentaires sur ces manuels

Pas de commentaire