Raymarine ST50 plus Manuel d'utilisateur télécharger pdf (Page 18)

ST50

Plus Ttidata and Repeater Operation and Installation Handbook Chapter 6: Calibration

Fewer-tip

Action

Display Shows

Press and DEPTH and SPEED together

CAL after 2 seconds and

for 4 seconds

CAL and software

number after 4 seconds

Press DEPTH twice

CAL CODE OFF

Press

SPEED

----

Press TRIP or RESET to select first

---

number

Press

SPEED to

accept number

---

Press TRIP or RESET to select second 1 2 _ _

number

Press SPEED to accept number

2’-‘-

Press TRIP or RESET to select third

123-

number

Press SPEED to accept third number 123’

’

10 Press TRIP or RESET to select fourth

2 3 4

number

12 Press SPEED to accept code

‘1234

13 Press SPEED

14 Press SPEED

15 To exit CODELOCK, press DEPTH and

SPEED together for 2 seconds

‘S’

CAL CODE SET

Normal operation, eg.

speed and depth

displays

T1291

Note:

you wish to cancel the code or change the number, simply re

enter and accept the current number.

Your Code Number

For future reference, enter your chosen code number into the box below.

For obvious reasons, please store this handbook in a safe place.

Operation

When the unit is powered on you are prompted to enter the code number.

To enter the number, carry out actions 3 to 12 above and press

SPEED.

Chapter 6: Calibration

As it leaves the factory the ST50 Plus Tridata is set to display speed in knots,

distance in Nm and depth units in feet. These settings, together and other

navigational features, can be changed (e.g., feet to metres) as described in this

Section.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 24 25

Commentaires sur ces manuels

Ff 27 Mar 2025 | 12:48:45

Notice st50

Raymarine ST50 plus Manuel d'utilisateur Page 18

Commentaires sur ces manuels

Produits connexes et manuels pour Systèmes de contrôle d'accès de sécurité Raymarine ST50 plus