Raymarine 465 Spécifications télécharger pdf (Page 22)

12 RC435 and RC435i Chartplotters

Pole Mounting

1. Screw the pole mount base to a suitable pole or rail mount bracket,

having an industry standard 1inch 14TPI thread, until secure.

2. Pass the cable through the center hole of the pole mount base (A) or

insert the cable into the side exit channel (B).

3. Check that the cable is positioned correctly and secure the GPS

Antenna to the pole mount base using the two screws provided.

If the cable is to exit from the side of the GPS Antenna through the

side channel, remove the two plastic tabs obstructing the cable chan-

nel.

Note: Failure to remove the plastic tabs from within the cable channel

could result in cable damage.

D4726-2

81236_1.book Page 12 Monday, January 5, 2004 3:41 PM

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 131 132

Pas de commentaire

Raymarine 465 Spécifications Page 22