Raymarine GyroPlus Yaw Sensor Guide d'installation télécharger pdf (Page 11)

Chapter 1: Basic Operation 5

In Standby mode:

• You have manual control of the boat.

• The display shows

STANDBY

and the boat’s current compass heading.

Using the autopilot to steer to a heading

Before engaging the autopilot, ensure you can steer the boat satisfactorily by hand,

then steady the boat on the required heading.

To engage the autopilot for automatic steering:

• Press the

auto

key.

The SPX-5R Drive system will steer the boat on the chosen heading, which is shown

on the display. This mode is also known as “point-and-shoot”.

Changing course in Auto mode

In Auto mode, use

-1, -10

and

+10

to change the locked heading, in either 1° or

10° steps.Use

-1

-10

to apply changes to port and

+10

for changes to

starboard. For example: press

-10 three times for a 30° course change to port.

D10524-1

TRUE

D3560-6

TRUE

Port Starboard

or or

D11366-1

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 37 38

Pas de commentaire

Raymarine GyroPlus Yaw Sensor Guide d'installation Page 11