Raymarine Radar Scanner Guide de l'utilisateur télécharger pdf (Page 15)

Installation 11

Connecting the power and digital cables

The following must be observed:

• The threads of the Digital Radome digital cable external connector

should be lightly greased with “Renolit Aqua 2 Calcium” grease if

disconnected after the initial installation.

• Preferred connection of the power cable is directly to your boat’s

power distribution panel.

• Care should be taken to ensure a firm connection between the Digital

Radome’s external connector and the digital cable connector.

• The digital cable connection to the Digital Radome scanner must be

hand-tightened only.

The following diagrams show the various configurations in which the

Digital Radome scanner may be connected to your multi-function display:

Digital Radome connected directly to C-Series display

Note:

you must use a SeaTalk

Crossover Coupler for direct connections.

C-Series display

Radar

D11372-1

SeaTalk

Crossover

Coupler

12/24V power

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 28 29

Pas de commentaire

Raymarine Radar Scanner Guide de l'utilisateur Page 15