231
Corrosion Control
ProMariner Corrosion Workbook
Take the guesswork out of corrosion
control. Written for the nontechnical person,
ths oo nswers estons n orrets
misunderstandings about galvanic corrosion
and stray current corrosion.
PRO 20001
ProMariner
Corrosion Test Meter
This analog test meter can help you
n orroson roles est se
in saltwater environment. Easy to
read good-/bad colour scale. Includes
accurate silver chloride half cells on 20
foot test lead and a 10 foot probe lead.
PRO 20006
ProMariner
ProSafe Galvanic Isolation
Interrupts galvanic circuit with other
boats and the dock when your boat is
plugged into a shore power system.
Maintains AC safety ground and solves
the most common cause of galvanic corrosion. Protects against
zinc loss. An economical way of stopping zinc loss and
providing galvanic protection, but with no monitoring.
Input: 120 VAC, 50/60Hz
Rated: 41 amp continuous duty
Use with 30 amp shore power cord
: 1 : : 1
PRO 22033
Guest Galvanic Isolator
Prevents the galvanic corrosion that occurs on
boats with AC power feeds.
Voltage Rating: 115/230VAC
reeny tn:
Current Rating: 30A at 50°C
Operating Temp: -20 to 50°C
Continuous Amps: 30 Amps
Operation: 115/230VAC/50-60Hz
ensons: 1
Weight: 3.25 lbs
GUE 4531001
Newmar Galvanic Isolators
Installing a galvanic isolator between
the AC safety ground and DC bonding
system, blocks a majority of the low
voltage currents, and corrosive action on
the ns s snntly ree hs ens snnt sns
in boat haul-out fees and zinc replacement costs. For additional
safety, the units feature a large capacitor, providing a secondary low
impedance path for sending AC current to ground.
NEW GI-30 30 amp, 2.45 lbs, 2.7" x 4.8" x 7.3"
NEW GI-50 50 amp, 3.2 lbs, 4.5" x 4.7" x 8.9"
All the same features as the 20030
above but also includes a corrosion
controller which prevents wooden hull
damage and controls zinc consumption.
PRO 20020
ProMariner Deluxe Corrosion Monitor
For monitoring corrosion on all types
of vessels. It is installed between the
zinc and the boat's bonding system. It
monitors galvanic and stray currents
that cause corrosion.
PRO 20030
Guest Dynaplate
Hull Bonding and Grounding Plate
Reduces problems of RF interference,
poor SSB or AM transmission / reception
n oor reeton of low freeny
navigational bands such as Loran. Takes
the ground away from your engine,
providing a static-free line, eliminating interference and improving
performance. Reduces the occurrence of electrolysis and galvanic
corrosion due to differences between dissimilar metals. The bronze
terl seres s the net srl etl on the ln sle
after your zincs, providing another buffer against corrosion of
stainless steel parts. Low drag, non-fouling shape scrapes clean
with a wire brush. Each plate includes one gold plated mounting
bolt and silver contact paste.
Part # Plate Size Equals Copper Sheathing
GUE 4006
6" x 2" x 1/2" 12 sq ft
GUE 4008
8" x 2-1/2" x 1/2" 20 sq ft
GUE 4012
12" x 3" x 1/2" 40 sq ft
ProMariner Shaft Brush
A 12" phosphor bronze shaft with metal graphite
brush. Bonds propeller shafts to the vessel's
bonding system, eliminating the need for shaft
zincs.
PRO 20035
Commentaires sur ces manuels