Raymarine S1000 Guide de l'utilisateur télécharger pdf (Page 33)

User Guide 29

To Register a handset

In the DEALER menu, at

REGISTRATION, press PILOT.

If the S100 is not registered, the

display will read NOT REGISTERED.

Press > to start the registration

process, you can press < at any time

to stop the search.

When the S1000 is found by the

SmartController and registration is

complete, the display will read REGISTERED

Note: For successful registration, ensure that all other handheld units on

your boat are turned off. If you try to register a new handset with others ac-

tive, you will see a REGISTRATION INCOMPLETE message.

To de-register a handset

In the DEALER menu, at

REGISTRATION, press PILOT.

If the S100 is already registered, then

the display will read REGISTERED. Press > to continue, or STANDBY to

cancel the operation.

The S100 will attempt to communicate with the S1000 and de-register.

When complete, the display will read NOT REGISTERED.

If the S100 cannot communicate with the S1000 then a BASE NOT FOUND

message will be displayed. It is still possible to de-register the S100 at this

point by pressing >. To leave without de-registering, press STANDBY.

Factory Reset

This option will clear all settings from the S100 and the S1000. Press and

hold the PILOT key for 2 seconds to activate the reset.

Note: A reset does not alter the registration status of the S100

START >

HANDSET NOT

REGISTERED

REG >

SEARCHING

D7657-1

< CANCEL

REGISTERED

DE-REG >

D7674-1

81245_4.book Page 29 Monday, April 30, 2007 6:03 PM

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 39 40 41

Pas de commentaire

Raymarine S1000 Guide de l'utilisateur Page 33