Raymarine 6760 Spécifications télécharger pdf (Page 18)

12 Raystar 120 & Raystar 112LP GPS Receivers - Owner’s Handbook

3 NMEA/SeaTalk Connections

Using an alternative NMEA connector

If your equipment is not compatible with the supplied connector, remove

it and then either:

• use a connector block to re-connect the cable

• connect the cable to another type of NMEA connector.

Refer to Table 3-1 for information about cable colors. The cable can be

cut as necessary to the required length, or coiled and stored out of the way.

Note: Insulate and tape back any unused wires.

3.2 Raystar 120/112LP - SeaTalk versions

The SeaTalk versions of the Raystar 120/112LP have a 10 m (33 ft) cable

with bare ends. Use this cable to connect to your existing SeaTalk bus,

using the cable color information detailed in Figure 3-2.

Figure 3-2: SeaTalk cable connections

Table 3-1: Raystar 120/112LP NMEA cable colors

Pin No Color Function

1Red Power

2 & 3 Screen 0 V / ground

4 Yellow NMEA out

5Green NMEA in

6Brown RTCM in

D5900-1

SeaTalk cable

Red (12 V)

Yellow (SeaTalk input/output)

Brown (RTCM in)

Green (Not used)

Screen (0 V/ground)

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 29 30

Pas de commentaire

Raymarine 6760 Spécifications Page 18